Motor for Razor E90, E100, E125, E150, E175

Motor for Razor E90, E100, E125, E150, E175

SPECIFICATIONS:

• Power Output/Voltage: 100W/24V
• Chain Drive: 9 Tooth, 25H Sprocket
• Wire Length: 10 inches
• 2-Pin Connector
• Outer Diameter: 68mm
• Overall Length (including shaft): 123mm
• Mounting Hole Thread Size: M5x.08

COMPATIBILITY:

• Razor E90 (V1+)
• Razor E100 (V5+)
• Razor E125 (V5+)
• Razor E150 (V1+)
• Razor E175 (V1+)

Universal Parts 100 watt chain driven motor for Razor E90/E100/E125/E150/E175 electric scooters. This is for the CHAIN-DRIVEN Razor E90 (version 1+), E100/E125 (version 5+), E150/E175 (version 1+) and eSpark Electric Scooters. This E100 motor will not work on Razor E100 scooters that are belt-driven.

Note: Model versions can be determined based on your 8-digit product ID code. The product ID code can be found on the battery cover and/or on the bottom of the frame. The last two digits are the version number (e.g. “01”=version 1, “02”=version 2, etc.)

HOW TO IDENTIFY YOUR RAZOR MODEL VERSION:

Most replacement Razor part fitment is based on your model version.

Model versions can be determined based on your 8-digit Bar Code ID.

The Bar Code ID can be found on many places including the battery cover, on the bottom of the frame, charger, stem and/or box.

The 7th and 8th digits are the version number (e.g. “09”=version 9, “10”=version 10, etc.).

Once you know your version you can safely order the correct replacement parts for your Razor Scooter!

**NOTE: Electrical items are non-returnable so please check photos and specifications before ordering.

Please see our Warranty and Returns Policy