Cylinder Kit, Naraku 47mm Big Bore 70cc for 50cc 2-Stroke Keeway, CPI Scooters

47mm Naraku 70cc Big Bore Cylinder Kit 50cc 2-Stroke Air-Cooled Minarelli Based Scooters

SPECIFICATIONS:

• Upgrades to 70cc
• Cylinder Bore: 47mm
• Cylinder Sleeve Outer Diameter: 50.5mm
• Wrist Pin Diameter: 12mm

COMPATIBILITY:

• CPI – Aragon GP 50 2T, Hussar 50 2T >’03, Oliver 50 2T >’03, Popcorn 50 2T >’03
• Explorer – Cracker 50 2T
• Diamo – Velocity 50 2T
• E-ton – Beamer 50 2T, Matrix 50 2T
• Keeway – F-ACT 50 2T, Matrix 50 2T, Hurricane (Euro) 50 2T, Flash 50 2T, Focus 50 2T, Hacker 50 2T, Goccia 50 2T, Arn 50 2T
• Malaguti – F12 Phantom R 50 2T >’07
• Qlink – Hawk 50 2T, Rave 50 2T, Star 50 2T
• TNG – LS 50 2T, SS 50 2T
• Vento – Triton 50 2T, Zip 50 2T

70cc JOG 12mm Cylinder Kit. cylinder kit Naraku – 70cc – 1E40QMB RP-NK101.47 12mm jog yamaha High-torque 70cc cylinder kit suitable for everyday life and of NARAKU with 12mm gudgeon pin. This cylinder kit is not designed for speed, its strengths lie in the lower Drehzalbereich. Shortly above idle speed, a constant and very good acceleration follows without the engine unnecessarily high engine speeds to charge. The power output from a standing start makes a very good set of traffic lights and hill climbing, even in the passenger business, it’s fun.

The noise remains almost at normal levels. The performance improvement can be achieved even with the original exhaust system, which makes the cylinder for everyday all-rounder. Suitable for OEM exhaust systems and exhaust systems. The carburetor jets must be increased slightly. (About 7% to 10%) It comes complete with v-ring set, the original head of the posting. Spare parts for this kit, please select from the list below.

When installing the piston rings, please make sure that the T or J mark on the ring push the piston ring will always show up. Otherwise it may happen that the piston can not fit into the cylinder. .Racing Scooter Parts. High Performance Scooter Parts one of the best brands you can carry.

**NOTE: Please make sure that your scooter uses the 12m wrist pin and not the 10mm that goes thru the piston. There is no refund or exchange onthis item.

**MADE IN TAIWAN**

**NOTE: Electrical, High Performance, Aftermarket items are non-returnable so please check photos and specifications before ordering.

Please see our Warranty and Returns Policy